Tech-How.com – Blog

There may be many factors because of which the configuration of router gets corrupted and you need to manually re-configure the basic aspects of your modem.

The modem/ router we have is UT300R2U (Manufacturer: UTStarcom), so we will be giving details of it firmwire.

Now starting with the basics: It is not a good idea to just reset the modem (by presssing the pin-hole or resetting to factory defaults) and expecting that your modem will function properly, but surprisingly it messes up with the configuration……

Follow the steps to the simplest mode of configuration of your UT300R2U router : (The Bridge Mode)

1. Open your browser (Internet Explorer or Mozilla Firefox)  and type in the IP address of router. It is generally 192.168.1.1 or 192.168.1.2 (if connected via USB interface).

2. Enter the username and password. By default the username and password is:  admin

3.  Now you will be taken to the Device Info page.

4. Now click on Advanced Setup Page and (1) Check all the profiles and (2) Click on Remove and (3) Click on Save/ Reboot Button…..Close the Window and wait for a minute.

5. Now again open browser and navigate to 192.168.1.1 and enter username/ password and go to device info page……Navigate again to to the Advanced Setup Page.

6. Click on Add button

7. Now let the VPI/ VCI values be 0 and 35 respectively. Check the check box for “Enable Quality of Service” and press next.

8. Select Connection Type as “Bridging” and let the Encapsulation Mode be “LLC/SNAP-BRIDGING” and click on next.

9. Check the box which says “Enable Bridge Service” and press next.

10. Then you will be taken to WAN Setup – Summary page and click on save…..again click on Save / Reboot button and close browser and wait for a minute for the router to reboot.

11. Then use your Windows dial-up networking to dial into your Broadband (PPPoE) connection with correct username and password.

Hint: Use the Google DNS servers for best ping time: 8.8.8.8 and 8.8.4.4. READ MORE on How to Change your DNS on Tech-How.com Blog

————-

I hope this guide will help solve your router problems….

Feel free to leave any feedback or problems……I’ll be glad to help you…….

Thanks – TuX.

BOOKMARK TO:

Yes….we are stepping into a new decade and I (The Admin) at Tech-How.com, value your support and thank you for all the love.

I wish you all a Very Happy New Year 2010.

Tech-How.com also completes its one year at 18 January 2010…
I had started this site just to help my friends by writing good articles on technology and I started this site without anybody’s support and I never thought of coming too far.

Tech-How.com currently has 38 articles in total…
I must acknowledge of being way too lazy in writing articles daily which my readers demand. But coming 2010 will see lots of great articles and I will try to post more articles and try to be less lazy.

Show your love to me and to this site by promoting it via e-mail, forums and social networking sites…
Thanks for all your Love and support….
TuX (Tech-How.com/Blog Administrator).

BOOKMARK TO: